Unique Outdoor Screens are Easy to Set-Up and Easy to Use

Lay out the pieces and account for everything before assembling. Each frame has two stiles with attached panel guards, a top rail, a bottom rail with attached panel positioners, four sets of carriage bolts, washers, and wingnuts.  Easy!

Match the corresponding colors of both top and bottom rails with top and bottom stiles.  Insert two carriage bolts into the front side of each stile.  On the backside of each stile place a washer and wing nut onto each carriage bolt Then spin into place keeping the wingnuts loose.  Easy!

Place the panel pins into the top rail.  Next attach the frame to the railing by tying it into place using the panel guards with good, sturdy knots.  Level the frame before tightening the wingnuts.  Do not over-tighten.  Easy!

On the bottom of each panel are two panel positioning pins.  The top of the panel does not have them.  Place panel pin into the bottom of the panel.  Line the panel pin up with the center hole of the positioner, tilt the panel upward.  Lift the panel pin of the corresponding top rail enough to slide the panel into place.  Lower the panel pin through the top of the panel.  Easy!

Remove all but one Panel Pin in the top rail where a trellis will be used.  Place two panel pins into the bottom of the trellis and line up with the corresponding center holes of the positioners on the bottom rail.  Tilt the trellis up and lift the one panel pin on the top rail to slide the trellis into place.  Lower the panel pin. Put one additional panel pin in the top and bottom rails.  Once all panel pin holes are lined up, put in the remaining panel pins.  Easy!

To operate a Rotating Panel~ lift the Panel up, turn the Panel to the desired position, and then lower the Panel into the Positioner Holes. Easy!

       And in no time at all, a hearty, rugged, year-around screen is providing privacy, comfort, and a custom environment for container gardening. Easy!